How to

NaVi people need a video surveillance system to monitor the aliens' activity to keep the Great Tree away from attack.

So let us help them to build up the video surveillance system in two steps.

Step 1

Navi people should put some IP cameras onto the Hallelujah mountain;

Step 2

Run Client mode of Webcam Surveillance Monitor. Enter the IP address and port of those IP cameras.

Once the aliens's attack is coming, the video surveillance system will warn Navi people to retreat or fight.

Make sure a webcam is directly connected to your computer, and the webcam is pointed to the position you want to monitor.

Run 'Local Monitor' mode and configure the settings as your need. Click Start Detect button then your home would be under

video surveillance. Once some uninvited guys have enter your home, the surveillance system will record every details of their

motion, automatically capture timestamped snapshots of them.

You need an IP camera which is used for catching video outdoor. You need run the 'As a Client' mode of Webcam Surveillance Monitor.

Enter the IP address and Port of the IP camera, and you can have the outdoor video surveillance system.

Follow Camera-Video Properties.

This mode is used for monitoring remote webcam. When you are using an IP camera or running 'As a Server' mode on another computer, Client mode will receive video signal and monitor the remote side. The only thing is you must enter the right IP address and Port.

This mode is used for sending video signal to the Client side of Webcam Surveillance Monitor. This mode works just as a video provider

Which can only send video signal to the Client side of Webcam Surveillance Monitor.

When you are running the 'As a Server' mode of Webcam Surveillance Monitor, Click on the Start button, then the IP address and Port will display under the button. Click on the IP address to copy and enter them into Client Side.