Let us focus on this scene： When you establish a Local Area Network,  you would ask a question,  whether there is a “thief” stealing our net?  If you want to secure your network, you’d better know is there anyone mooch Off Wi-Fi from your network. According to a research, people like to mooch Off Wi-Fi if they can get access. If it is an immoral guy, he might do harm to your network when mooch Off Wi-Fi from you. On the other hand, if your internet free was charged by traffic, who mooch Off Wi-Fi from you may add on your bill. IP – MAC Scanner provide a solution to find out who mooch Off Wi-Fi from you, even to kick them out. It scans all connections on your network, and tell you which are unknown connections by a network analysis report.

Therefore, you should find the one who mooch Off Wi-Fi from you, you can go through four steps (including Main Board phase, Database phase, Email notification phase, Send message to remote desktop phase)

to complete this simple task, while you may define it a tough job without our AthTek IP-MAC Scanner.

Why and how to bind IP with Mac?

DHCP assigns IP address to each device randomly. Therefore, as a network administrator, you need to avoid the IP address of the host from changing and result in unable to filter, manage bandwidth for the packets. Administrators must configure Bind IP to MAC to assure the management. Once the IP address and MAC address are bound for a computer, the router can obtain the specified IP address according to the rules in IP

Bind List after identifying MAC address of a computer. Thus, effective management and control can be reached in network easily.

So, how to bind IP to Mac?

If your firewall/router is also your DHCP serve and it allows you to reserve IP addresses based on MAC address, you will need to configure it to do so. The method varies by brand (Linksys/D-Link/Netgear/Cisco and a thousand others) so you may need to consult the web or the manual.

Now a small tool can figure it work which is called IP-MAC scanner.

You can download and install it from here free.

• Firstly, open the software and click “scan” button.
•  
• Secondly, choose the IP addresses that you intend to bind with MAC and add them to the database.
• 
• Thirdly, change to the database tab and select the IP and MAC addresses.
• At last, right-click and choose “generate IP-MAC binding” item.

Is it easy? See more-http://www.athtek.com/ip-mac-scanner.html