2. Packets.
When you opened a captured file in AthTek NetWalk, you will see a new tab named “Packets” created on left. Real-time traffic analysis doesn’t support Packets tab. In Packets tab, network administrators can read all the communication details including requested IP addresses, ports, protocol, etc. If a common packet analyzer enables network administrator to see a naked data, AthTek NetWalk enables users to see a reliable anatomical traffic data through detail and hex view tool.

3. Layered View.
There are 3 layers in Layered View section: Application, Net&Transport and Physical. A significant different is, you can see communication flows in postmortem packet analysis.

4. Events Tab.
In Events tab, network administrator can jump to the communication flow when it is a postmortem packet analysis.

5. Matrix Map.
In Matrix Map, real-time analysis only marks active connections in green, while postmortem analysis marks all successful connections in green.

In short, postmortem analysis enables network administrators to see all communication details happened on the network. All you need to do is to capture packets and open the captured file in AthTek NetWalk.

Buy AthTek NetWalk Enterprise License in Special Offer

AthTek NetWalk is a super network analyzer for network administrators. It monitors the real-time data traffic on the network, and leads them to the professional analyzer to generate network traffic analyzing charts. Multi-protocols enables you to know every detail about your network within different layers, including Application Layer, Transport Layer and Physical Layer. It is good at packet sniffing and enables to analyze the real-time packet by built-in Wireshark. All the captured traffic data can be saved as trace files for further use. And by using the Matrix Map, you can see all the connections directly.

1. How to delete the component?
Click the drop-down arrow and you will see the delete option. For example, you want to delete the option of Top IP Hosts. You can click the drop-down arrow of Top IP Hosts component and choose Delete option, and then the component will be deleted from monitor interface. Particularly, you can also switch the graph from pie chart to host list.

2. How to add a new component to monitor interface?
Click “Add” on top right of monitor interface and then you will see the “Add Component” window. There are 8 types of components which you can add to the monitor interface. If you choose to add a graph, you will be asked to choose a graph type from 9 graph types. For example, you want to add a Monitor Packet Trend to 2nd row and 2nd column. Click “Add” on top right corner and choose Monitor Packet Trend in type, choose 2 in row and column. Press OK to add.

3. What components can you add to the monitor interface?

Yesterday we have received a message from Giveawayoftheday.com, they said they would schedule our AthTek NetWalk – Best Packet Sniffer on September 21, 2011. If you are looking for a network monitoring software or network manager but be aware of the price of AthTek NetWalk, here is a good news for you: you can free download and use AthTek NetWalk from GOTD on September 21, 2011! This license will enable you to run AthTek NetWalk a whole year and plus three months more. It will be expired on December 31, 2012. If you like it and there was no the end of the world in 2012, buy it then, to continue our human life and the network monitoring tasks!

Best packet sniffing tool for administrators.

AthTek NetWalk contains graphical representations of the network status with the use of advanced packet sniffing, to help project the network state in statistical and graphical format. Network administrators can easily get the traffic details from diagrams. Built-in packet filter can help you a lot with intrusion detection, all protocols are supported. AthTek NetWalk V2.1 perfectly supports IPv6, and get an integration with Wireshark which enables a better packet sniffing performance in network monitoring.

June 18, 2011 Development Center of AthTek Software
—————-
AthTek Software has just released an update of AthTek NetWalk, on both the enterprise and free personal editions!

What’s New?
* Intelligent navigation;
* Enhance packet sniffing on all protocols;
* Add many built-in rules in filter, like MSN, Yahoo messager;
* Optimize the interface;
* Completely support IPv6;
* Support traffic analyzing while packet sniffing;
* Integrate Wireshark and perform better than Wireshark.

AthTek NetWalk is one of the best packet sniffing tool in the administration of all kinds of networks. It can be well used by both experienced and new network administrators in packet sniffing and traffic analyzing. If you wish to gain in depth knowledge about network infrastructure and management, try to use this best packet sniffing tool and you will be an experienced network administrator in a few weeks!

AthTek NetWalk contains graphical representations of the network status with the use of advanced packet sniffing, to help project the network state in statistical and graphical format. Network administrators can easily get the traffic details from diagrams. Built-in packet filter can help you a lot with intrusion detection, all protocols are supported. AthTek NetWalk V2.0 perfectly supports IPv6, and get an integration with Wireshark which enables a better packet sniffing performance in network monitoring.

In the new edition, AthTek NetWalk includes:

Integration of Wireshark

Wireshark is cross-platform, using the GTK+ widget toolkit to implement its user interface, and using pcap to capture packets; it runs on various Unix-like operating systems including Linux, Mac OS X, BSD, and Solaris, and on Microsoft Windows. AthTek NetWalk takes advantage of Wireshark, and achieves more better performance than Wireshark. The speed of opening a trace file with AthTek NetWalk is about 6 times up than Wireshark, and AthTek NetWalk supports super large trace file without crashes.  Additional, AthTek NetWalk supports graphical traffic filters while the Wireshark only supports command line traffic filters.

Perfectly Support IPv6

IPv6 is a version of the Internet Protocol (IP) that is designed to succeed Internet Protocol version 4 (IPv4). The Internet operates by transferring data in small packets that are independently routed across networks as specified by an international communications protocol known as the Internet Protocol. Each data packet contains two numeric addresses that are the packet’s origin and destination devices. Since 1981, IPv4 has been the publicly used version of the Internet Protocol, and it is currently the foundation for most Internet communications. The growth of the Internet has mandated a need for more addresses than are possible with IPv4. IPv6 allows for vastly more addresses. AthTek NetWalk can perfectly performs as a network monitoring tool via protocols like IPv6.

More new features are waiting for you in the new AthTek NetWalk!

How To Limit Peet to Peer File Sharing

Development Center of AthTek Software
——————-
AthTek NetWalk is going to update to V2.0!

After a long time close testing, we are ready to update AthTek NetWalk to V2.0. As many of our customers maybe know, AthTek NetWalk is the most powerful network management tool in the world. It can help a lot in administrators’ work.

In the new update, AthTek NetWalk will include:
* Diagrams to original data navigation.
* Enhance packet sniffing on all protocols.
* Add many built-in rules in filter, like MSN, Yahoo.
* Optimize the interface.
* Completely support IPv6.
* Support timing analysis while capturing packets;
* Integrate Wireshark to NetWalk and gain more better performance than Wireshark.

Anyone who want to get discount coupon of AthTek NetWalk (save 150.00 US Dollars!), please help us write a professional review on your software blog, or help us translate AthTek NetWalk into Spanish/German. Of course, if you have done all of above, you will save $299 and get a totally FREE registration code for the new AthTek NetWalk! Please, don’t miss the few chances to save your money!

AthTek NetWalk – Top Network Monitoring Software For Administrators
Collecting Data Using AthTek NetWalk
AthTek Skype Recorder is Going to Update in June
New Version of Code to FlowChart is Coming Soon